CM5：5轴涂覆监测

这是 Cersa MCI 的 CM5 产品的主图，该产品是一款用于光纤制造商的测量仪器。.

Manufacturers need to check the final diameter of the coated optical fiber, but also to detect flaws (lumps & necks) into the coating asymmetry. With its 5 measuring axes that cover 100% of the surface, and its exceptional measuring speed, the CM5 is the perfect instrument for a complete inspection of the coated fiber. CERSA has continued to upgrade its device over time by adding additional features such as the detection of internal flaws in the coating (bubbles, particles), but also the measurement of asymmetry in coating layers.

技术文档

Here's a close-up of Cersa MCI's CM5 product, a measuring instrument for fiber optic manufacturers.

Diameter, asymmetry and flaws detector for coated fiber optics

The CM5 is a powerful, complete system (final diameter measurement, asymmetry and detection of internal flaws such as bubbles, delamination, lumps and neck-downs, able to adapt to the ever-increasing drawing speeds to gain in productivity.

The CM5 should be installed before the capstan, i.e. before the coated fiber touches a pulley, to avoid the detection of marks that could appear on the surface due to fiber-pulley contact. The extreme sensitivity of the CM5 could generate false flaws in this case.

100% inspection of the optical fiber

This CM5 measuring system exists in both Base and Full versions.

Features of the CM5 Base:

- Measurement of the outer diameter of the coated optical fiber (245µm)
- Continuous detection of lump and neckdown flaws
- Internal and surface defect and impurity detection in the coating
- X&Y position sensors with uncertainty of +/- 0.1mm help in aligning on the draw towerr

Additional features provided by the CM5 Full:

- Detection of flaws, bubbles, delamination within the coated layers to ensure a longer service-life for the optical fiber.
- Measurement of the asymmetry of the glass within coating layers to ensure continuous monitoring of the concentricity of the fiber.

Digital and analog inputs and outputs, RS232 output, fieldbus options, are used to connect the CM5 to the PLC tower for control loop needs and measurement analysis.

技术文档

光纤测量的软件解决方案

CIM在线测量软件（CIM PROD版本）

CIM软件是CERSA MCI为精细线//线缆/管材和光纤测量开发的全面生产质量管理工具。

CIM PROD版本的软件，可以设置仪器的参数，能够清晰的显示生产测量结果以及任何检测到的缺陷，能够生成实时参数并将所有测量值和事件记录在数据库中。

PROD Full 版本是为光纤在线生产测量而开发，具备根据生产环境调整公差、触发阈值以及换盘的特定功能。

进一步了解请点击